After installing termsrv. I installed it and it fixed my issue. Make sure you have the latest DLL from the zip file. RDC is much faster and the colors are more vibrant!
This is not an easy process so I recommend printing this. I took me about 7 hrs from researching and messing around with settings to get this to work. I hope this works for you first time. This will give you an in-depth walk-through on making your remote desktop work. Then to top it all off, I needed a static IP to make it work. Both are false. Here is how I made it all work.
Download a patch for Windows Vista Home Premium. I believe the provider of my batch file was greenlight? Make sure to save this file in the temp file. Go to files on your computer ie. Right click on the start ribbon on your desktop screen. Select classic this makes things easier. You now have RUN listed on your start menu. From there you can select reboot in safe mode. Note you will need to do this again and turn off Boot in safe mode when you are done with the installation otherwise you will only boot in safe mode.
Once the computer reboots try extracting again. Make sure to research this if you are having issues. You do not want someone else controlling your remote access. It can create problems if it is turned off read below. You will also need to go into the control panel , select system, remote settings, enable connections for Remote desktop.
Next the router. You want to go to the router You will need to log into your router. Once you are into the router, you will select applications and gaming. You will notice port forwarding appears.
Now for the IP address make it Scroll down to Static DNS:1 and input that address we used in port forwarding You can exit the router now. Make sure you have saved. Time to setup your computer to read this connection. So right click the computer screen with the globe in front of it on the bottom right of your screen. Select Network and Sharing Center. This should open a screen, select manage network connections on the right.
Now change the automatically find to input this IP and enter that static IP you created Use the other two of the three or if you only have two then use them but they should be different that your created static IP. One thing to keep in my is that your connection will be the IP of the router.
So if you are trying to remote desktop connect to your network, use the IP from the status screen of the router. You may occasionally have to check to see if your IP address has been changed since service providers can change them if you are not signed up for a static IP address. This can cause connection issues. You may need to perform the take own again. See if says listening. TeamViewer is one of the most versatile remote desktop applications available for Windows and all major mobile and desktop platforms.
The best part is the application is free for personal and non-commercial use and allows instant remote connection between two computers provided both the computers have the application installed and configured to connect. It does not need any default port to connect to the computer remotely. A potential competitor to TeamViewer, Anydesk is also free for personal usage is compatible with every device you can think of and it includes your Raspberry Pi in addition to usual mobile and desktop platforms.
For those who live and breathe in their Chrome browser or use a Chromebook, there is not a better option than Chrome Remote Desktop. The idea of using a pro feature on the Home version of Windows 10 without paying for an upgrade, while a fascinating idea, is a workaround at the end of the day. It might or might not work. While the contributors to RDP Wrapper on GitHub are doing an excellent job of keeping the library updated to absorb changes introduced by Windows updates, it is a cat and mouse game.
They are not always on the same page. Going by the number of updates Microsoft is pushing to its Windows platform, it is hard to keep up. I recommend you either upgrade to Windows 10 Pro or buy a license to one of the tools I mentioned above. For everybody else, I recommend giving this technique, to enable the RDP server on Windows 10 Home, a try before going for an alternative.
Like others, a recent update has removed rdp listening. Error with the installer. Event viewer is unhelpful. I found the fix! Connect to another remote with RDP enabled. Please run the MSI file instead of opening and extracting it. I can confirm that the MSI file runs on my computer. I have 2 Lenovo laptops that I was able to log into remotely from my phone. Both have windows 10 home. If your router doesn't have a DDNS client built in, or if you are not using a hardware router, you have to install a software DDNS client to do the job.
You want one that doesn't require any manual intervention to get started and that always runs even when nobody is logged on. This means that you need one that operates as a Windows service rather than as a regular desktop application. Here's how to set it up.
If you use Windows Internet Connection Sharing, perform this procedure on the computer that shares its connection with the Internet, whether or not it's the computer that you're enabling for Remote Desktop access. Otherwise, do this on the computer that you're enabling for Remote Desktop access. Follow the wizard's instructions, clicking Next after you fill in any required information on each page. On the first page, if you have dial-up or DSL service that requires a logon and password and the connection is made directly from your computer , click Dial-Up.
If you have cable Internet service or you have a router that establishes the connection for you, select Local Area Network. Now your registered host name will always point to your computer, even when your IP address changes. After a change, it might take up to an hour for the update to occur, but changes should be infrequent. The last setup step is to make sure that incoming Remote Desktop connections from the Internet make it to the right computer.
If your computer connects directly to your cable or DSL modem, you can skip this step. However, if you use Internet Connection Sharing or a connection-sharing router, you have to instruct your sharing computer or router to forward Remote Desktop data through to your computer. To be precise, you have to set up your sharing computer or router to forward incoming requests on TCP port to the computer you want to reach by Remote Desktop.
The procedure depends on whether you are using the Internet Connection Sharing service built into Windows or a hardware-sharing router. Use one of the procedures described in the next two sections. If you use the built-in Internet Connection Sharing service provided with Windows to share an Internet connection on one computer with the rest of your LAN, the forwarding procedure is pretty straightforward using these steps:.
Now you should be able to reach your computer from anywhere on the Internet. If the connection doesn't work, check the "Troubleshooting" section at the end of the chapter for some suggestions.
If you are using a hardware connection-sharing router, setup is a bit more difficult but is worthwhile. First, because your router doesn't know your computers by their names, you have to set up a fixed IP address on the computer that you will be using via Remote Desktop, using these steps:.
If you need to set up any other computers with a fixed IP address, use the same procedure but use addresses ending in. Now you have to instruct your router to forward Remote Desktop connections to this computer. You need to use the router's setup screen to enable its Port Forwarding feature, which some routers call Virtual Server or Applications and Gaming.
There you need to enter the fixed IP address that you assigned to your computer and tell the router to forward connections on TCP port to this address. Every router uses a slightly different scheme, but Figure If a range of port numbers is required or external and internal numbers are entered separately, enter in all fields. To learn more about forwarding network requests on a shared Internet connection, see "Enabling Access with a Sharing Router," p.
I would like to receive exclusive offers and hear about products from InformIT and its family of brands. I can unsubscribe at any time. Pearson Education, Inc.
This privacy notice provides an overview of our commitment to privacy and describes how we collect, protect, use and share personal information collected through this site. Please note that other Pearson websites and online products and services have their own separate privacy policies.
To conduct business and deliver products and services, Pearson collects and uses personal information in several ways in connection with this site, including:. For inquiries and questions, we collect the inquiry or question, together with name, contact details email address, phone number and mailing address and any other additional information voluntarily submitted to us through a Contact Us form or an email.
We use this information to address the inquiry and respond to the question. We use this information to complete transactions, fulfill orders, communicate with individuals placing orders or visiting the online store, and for related purposes. Pearson may offer opportunities to provide feedback or participate in surveys, including surveys evaluating Pearson products, services or sites. Participation is voluntary. Pearson collects information requested in the survey questions and uses the information to evaluate, support, maintain and improve products, services or sites, develop new products and services, conduct educational research and for other purposes specified in the survey.
Occasionally, we may sponsor a contest or drawing. Participation is optional. Pearson collects name, contact information and other information specified on the entry form for the contest or drawing to conduct the contest or drawing.
Members Current visitors. Log in Sign up. Search titles only. Search Advanced search…. New posts. Search forums. Log in. Sign up. Computer problem? Tech Support Guy is completely free -- paid for by advertisers and donations. Click here to join today! JavaScript is disabled. For a better experience, please enable JavaScript in your browser before proceeding.
Solved: Remote Desktop for Vista home premium? Thread starter kerrihelp Start date Sep 9, Status This thread has been Locked and is not open to further replies. The original thread starter may use the Report button to request it be reopened but anyone else with a similar issue should start a New Thread.
Watch our Welcome Guide to learn how to use this site. Joined Aug 30, Messages
0コメント